Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd
+86-571-88115720

Products

1.Company in USA :
American Torque Wrench, Inc
803 Summer Park Drive Suit 150 Stafford, Texas 77477, USA
www.atwtools.com
P:+1-713 581 8904
CELL: +1-281 707 6545
E: info@wrenchina.com

2.Factory in China:
Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd
No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
www.wrenchina.com
P: +86-571-88115720
F: +86-571-88110210
E: info@wrenchina.com

News
Home > News > Content

Introduction And Characteristics Of Hydraulic Pumps

    Hydraulic pump is the hydraulic system of the power element, is driven by the engine or motor, from the hydraulic tank inhalation of oil, the formation of pressure oil discharge, sent to the implementation of a component components. The hydraulic pump is divided into gear pump, piston pump, vane pump and screw pump.Hydraulic Pump

    A hydraulic element that provides pressurized fluid for hydraulic drives is a type of pump. Its function is to power machines (such as motors and internal combustion engines, etc.) into the mechanical energy of the hydraulic energy.

    There are many factors that affect the service life of the hydraulic pump. In addition to the design and manufacturing factors of the pump, some of the components related to the use of the pump (such as couplings, oil filters, etc.) are also related to the operation of the test run.Hydraulic Pump

    The working principle of the hydraulic pump is that the movement causes a change in the volume of the pump chamber, thereby compressing the fluid so that the fluid has a pressure energy. Must have the conditions that the pump chamber has a sealed volume change.Hydraulic Pump

    Features: aluminum alloy, high strength, corrosion resistance, light weight, suitable for a variety of environments. Two-speed characteristics to reduce the number of times in the low-pressure chamber quickly in the load power state, immediately converted to high pressure, shorten the cycle of each operation. Equipped with pressure regulating valve, adjustable control and set working pressure. composition


Feedback

If you have any enquiry about quotation or cooperation, please feel free to email us at info@wrenchina.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Contact Us
Address: No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
Tel: +86-571-88115720
Fax: +86-571-88110210
E-mail:info@wrenchina.com
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML