Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd


1.Company in USA :
American Torque Wrench, Inc
803 Summer Park Drive Suit 150 Stafford, Texas 77477, USA
P:+1-713 581 8904
CELL: +1-281 707 6545
E: info@wrenchina.com

2.Factory in China:
Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd
No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
P: +86-571-88115720
F: +86-571-88110210
E: info@wrenchina.com

Home > Knowledge > Content

Suddenly not enough check hydraulic system using methods

Source: | Updated: Apr 28, 2015

(1) check the cylinder inner-leakage in the hydraulic system. Rises in the hydraulic cylinder is the most easy way to see if there are obvious free fall. If drop significantly then remove fuel tank check and seal if it is worn it should be replaced.

(2) check the hydraulic valves. First of all clean the pressure regulating valve, check that the valve is worn, wear and should be replaced. Pressure regulating valve after installation if there is no change, then check the valve spool for wear, its clearance limit is generally 0.06mm, wear should be replaced.

(3) measuring the pressure of the hydraulic pump. If the pressure is low, adjust pressure adjustment, then a severe wear of the hydraulic pump.


If you have any enquiry about quotation or cooperation, please feel free to email us at info@wrenchina.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Contact Us
Address: No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
Tel: +86-571-88115720
Fax: +86-571-88110210
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML