Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd


1.Company in USA :
American Torque Wrench, Inc
803 Summer Park Drive Suit 150 Stafford, Texas 77477, USA
P:+1-713 581 8904
CELL: +1-281 707 6545
E: info@wrenchina.com

2.Factory in China:
Hangzhou WREN Hydraulic Equipment Manufacturing Co.,Ltd
No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
P: +86-571-88115720
F: +86-571-88110210
E: info@wrenchina.com

Home > Knowledge > Content

Common faults of hydraulic station system not holding pressure

Source: | Updated: Apr 28, 2015

Hydraulic pressure station pressure is not insurance system with failure, hydraulic station-initiated cases, is definitely stressful. You said not holding the following situations:

1, case of hydraulic station opened, no pressure. Why pump bad pump pressure is too low pressure reducing valve pressure too low. Generally because the pressure directly into the fuel tanks, and can't afford to build pressure.

2, if you are talking about units closed, actuator not holding pressure. Cause: your no circuits of keeping pressure in hydraulic system; one-way valve is bad if the accumulator, perhaps because the accumulator pressure pressure is not enough. If two sets of valves it is best to do. You can keep this nice set of one-way pressure valve to a group that you don't trust, if it can be solved then buy a valve is. And you say louder, likely causes are: plunger pump is broken, wear a long period use will have a lot of noise; there is your pressure may exceed the rated pressure of the piston pump itself; the accumulator itself no sound, only pressure relief with a loud noise.

Previous: How to use hydraulic oil for hydraulic station

Next: No Information


If you have any enquiry about quotation or cooperation, please feel free to email us at info@wrenchina.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

Contact Us
Address: No.24, Xingxing Road, Xingqiao, Yuhang, Hangzhou, China
Tel: +86-571-88115720
Fax: +86-571-88110210
Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML